Inductor

An inductor is a passive two terminal electrical component will resist the change of flow of the electrical current through it. It also named as a coil or a reactor. The inductor is naturally a conductor which turned to in the form of coil which stores the energy temporarily when current flows through it by creating a magnetic field. When the current flow changes in the inductor the magnetic field will induce a voltage in it, by the Faraday’s law of electromagnetic induction it opposes the change in current created on it. This property is called the inductance and the unit is henries (H).  The operation of the inductor is that it will block the flow of AC when it passes the DC. Inductors are widely used in tuned oscillators ant in

electronic filters.

Crystal Oscillator

The crystal oscillator is an oscillating circuit that uses the mechanical resonance produced by a vibrating crystal of piezoelectric material to produce the electrical signal having the stable frequency. Because of its stability in producing frequency which is used to provide clock signal for digital circuits, used in quartz wrist watches for tracking the tome, to stabilize the frequencies of radio transmitters and receivers. The oscillator circuits which containing the crystal named crystal oscillatory circuits. The most common used piezoelectric crystal is quartz crystal.

The frequency range of kilohertz to hundreds of megahertz is manufactured by with help of these quartz crystals. As say above the most applications of these crystals are used in cellphones, computers, radios, clocks, wristwatches, signal generators and in oscilloscopes

Capacitor

The capacitor is a passive two terminal electrical component which is used to store the electrical energy electrostatically in an electric field. The mechanism is used to store the energy is that two electrical plates are separated by a dielectric. When a capacitor is connected across a voltage source for a sufficient time it will not pass any current through it. But it will charge to the potential between its plates. Here one plate is act as a +ve plate and another is –ve plate. The unit of the capacitance is farads. The capacitor will block the DC but passes the AC. The main applications of the capacitors are used in analog filter networks, for smoothing the output of the power supplies, and in resonant circuits for fine tuning of frequencies.

The capacitance C of the capacitor is characterized by the ratio of applied charge ±Q and the voltage across the conductors. That is C=Q/V. The working of the capacitor is that it charges with the charge of source and it discharge through the path which it would grounded. This charging and discharging of the capacitor will make it as favorable for oscillators and integrator's.